Memory Foam Helm Pad. Peel and stick over Non- Skid. It is reccomended to not cover any deck plates. Wipe down area with alcohol and install above 60 degrees.
If you need a custom dimension please email Cj@hookedup-customs.com prior to placing order. Be sure to measure the area first. All sales are final. Please note the memory foam may ship seperately than our 6mm. Stick the glue side of the 6mm to the non glued side of the memory foam.
# Installing Your AquaTraction Pad
Follow these steps to properly install your AquaTraction pad:
1. Prepare the deck surface:
- Clean thoroughly with acetone/alcohol
- Make sure the deck is above 60F degrees
2. Begin installation:
- Score the paper backing of the pad
- Peel back a small portion of the backing
3. Position and apply:
- Carefully place the pad in the desired location
- Gradually peel off more backing while pressing the pad onto the surface
- Continue this process until allwax paper backing is removed
4. Secure the pad:
- Press firmly across the entire pad
- Ensure the adhesive is fully bonded to the surface
For best results, follow each step carefully to achieve a secure and long-lasting installation.
Teak Pattern - *Lines will be running bow to stern.*
The first color is the top color.